Follow this step-by-step guide and wake up in a nice dry bed!
Check out the video below in which our Oopsie Fans explain how Oopsie Heroes works.
Simply attach the sensor to the exterior of the underwear or pyjama pants using one of the adhesives from the sticker sheet. The sensor should be place in the expected leak area. Each packet contains several sticker sheets. After each use clean sensor by wiping with a damp cloth. Do not apply the Oopsie Heroes sensor directly on the child's skin.
Please note that you cannot use a diaper in combination with the sensor.
Open the Oopsie Heroes app, select an alarm sound (or record your own voice!), adjust the alarm volume and activate 'go to sleep'.
Place the mobile device anywhere in the child's room.*
*Don’t worry, three meters away is totally fine.
After the little accident, the sensor will magically send a signal to the mobile device.
And remember, Oopsie Heroes uses sound signals. Harmless. No Bluetooth here!
Do you want to test the sensor? In this case, place a € coin on the OH sensor metal pins and you will hear a peep (watch the tutorial video above.) You can also hear the sensor sound and test the app by clicking on the button below.
It works! You're good to go.
*Not recommended to test with water.
The sound signal from the sensor will be picked up by the mobile device and wake up your child up with a nice sound which can be selected by you!
You as a parent can even record your own voice and use that as the alarm sound!
After being awoken by the app, your child can make it to the bathroom on time and finish urinating at the toilet . This creates a new positive behavior which help to recognize the bladder signals.
For the best results, make sure that your child is awake and aware.
After the alarm, please remove and clean the sensor and store it safely.